信毅科技有限公司,PVC各式工程塑膠抗靜電板,PC,信毅, Advanced Profile System, Engineering Module Service, Glass Substrate Guide Roller, High Temp, Erosion/Scratch Resistance, Hybrid Bearings, High Temp 信毅科技有限公司








 

 
Feature of PLANEVEYOR
PLANEVEYOR employs the state-of-the-art,original ball surface (PAT.P),which is entirely different from the conventional ball-bearing transfers
(except press-worked type).
 
The conventional ball transfer system receives the whole load of objects at a limited section of the small balls support directly under the large ball (See Fig.1)
while PLANEVEYOR circumferentially receives the load of objects with many small balls around the large ball because of the original ball surface applied (See Fig.2)
Fig.1
Fig.2
Fig.3
Conventional Type (Our old type)
New Type (PAT.P)
 
 
Performance of PLANEVEYOR
1.The Unique Upward/downward Reversible Ball Transfer!
Even if PLANEVEYOR is used downward (see Fig.3),the load is also supported with the
same ball surface (concave) as used upward due to the original ball surface. Thus
PLANEVEYOR can be used both upward and downward.

2.Higher Durability and Lower Frictional Resistance than
conventional products!
When loaded with objects of the same weight, the bearing stress of PLANEVEYOR is
decreased by approx. 40% compared to the convetional products (our old type), and
durability is considerably improved.
The startup frictional resistance, 2/100 or less, is also achievde (The ball contact surface is SS material).

3.Dust discharge type (standard product) makes operations under severe conditions possible!
PLANEVEYOR does not receive the load at the small section of the small balls support,
directly under the large ball.lts structure allows many dust discharging holes to be
perforated at the small ball support area (See Fig.4) for discharging dust and/or water
infiltrating inside. lt operates properly and ensures continuous smooth rolling motions
even under the severest conditions.

4.Huge cost rduction realized!
By the completely streamlined production process as well as mass-production made
possible due to its unique reversible feature, hunge cost reduction was successfully
achieved.




.. PLANEVEYOR for Cleanrooms
Test Data for Particle Generation and Endurance of PVP Series
 
The particle generation per one cubic feet was
measured with an airborne particle counter while
running PLANEVEYOR in a clean box.






<Test Equipment and Conditions>


Test quipment



 
<Particle Generation Test>PVP20BJ-JJ
All POM type without dust discharging holes

<Endurance Test> PVP20BU-JJ
Main ball U-PE small ball main doby POM type
Without dust discharge holes
 

Running Speed
300mm/sec
Load
1.5kgf
PVP Surface Contact
Glass piece

(Clean Box Test Environment)
Clean Box Fan Fan Capacity for Continuous Operation
11.0m / min
Air borne Particle Counter Capacity 0.1cf/min
Suction for 10min.per 1km
Particles in a clean box when PLANEVEYOR stops Particle 0.5u none
Particle 0.3u 2

<PVP20BJ-JJ Particle Generation Test Data>
<PVP20BU-JJ Endurance Test Data>

 
PVXA Series (PAT.P)
<Excellent for positioning glass substrate casing cassettes in a cleanroom!>
Free movement of the top plate enables a precise positioning of glass substrate casing cassettes in a short time (See Photo 1).
Under non-load condition, its return-to-datum-point function of the nuit instantly prepares to position the next workpiece (see Photo 2).
lf employed with either PVXA-R type designed to fix the position of glass substrates by locking the movable
part or PVX-L type having an air cylinder for lifting and lowering built-in, positioning procedures for each process
is simplified and also, the substantial cost reduction for equipment investment can be realized.

 

PVP Series
<The original ball surface technology (PAT.P) made it possible to produce whole resin PLANEVEYOR!>
We succesfully developed whole resin PLANE-VEYOR without lowering the load capacity, which defies the conventional idea for the di-rect ball-bearing transfer systems for glass substrates used in cleanrooms, This resin PLA-NEVEYOR allows a smoother positioning than the convntional methods using peak pins. And also,
fine dust or cutting chips infiltrating in-side are discharged
from holes perforated at bolt area (see Photo 1).




PVPR Series (PAT.P)
<Fist of its kind! The Large Ball Lock System firmly fixes glass substrates>
Using resin materials, this type transfers and
positions glass substrates while reducing the
damage to glass surface.
With our original ball surface technology
(PAT.P).the load is distributed among many
small balls around the large ball which rolls very smoothly.
Moreover, the large ball is locked with the air to
avoid glass substrates from being out of posi-tion
so as to enable its precise positioning.




 
新竹市中華路三段9號10樓之3
10F-3,No.9,Sec.3,Chung-Hwa Rd.,Hsinchu City 30060,Taiwan
TEL:886-3-528-1001 FAX:886-3-525-4513

台中市大里區東興路350號
No.350,Tung-Hsin Rd.,Taizhong City,Da-Li City,Taiwan
TEL:886-4-2406-4668 FAX:886-4-2406-6146

華南營業處
中華廣東省東莞市清溪鎮羅馬路99號1樓

1F,No. 99, Roma Road, Qingxi Town, Dongguan, Guangdong, China
TEL:+86-769-89771679  FAX:+86-769-87895463