信毅科技信毅科技

產品與服務 / 日本電產 NIDEC 滾珠導螺桿

日本電產 NIDEC滾珠導螺桿

download download

type:DC

RETURN GUIDE TYPE SINGLE FLANGE SINGLE NUT
(Non-preloaded)


Simplest type using a single nut. For use in slight axial clearance.


type:DP

RETURN GUIDE TYPE SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)


Designde to preload with a single nut.Steel balls whose diameter is slightly larger than clearance between screw shaft and thread groove of nut are put in the nut and pre-loaded.

The ratio of load balls to spacer balls used there is 1:1Suitable for light preload (See Pager 16.)


type:DD

RETURN GUIDE TYPE SINGLE FLANGE DOUBLE NUT
(Spacer preloaded)


Designde to preload with two nuts. A spacer with thickness equivalent to amount of preload is put between these two nuts and preloaded as prescribed Suitable for medium preload.(See Page 16.)


type:TCS

TUBULAR TYPE SMALL LEAD, SINGLE FLANGE SINGLE NUT
(Non-preloaded)


Simplest type using a single nut.For use in slight axial clearance.


type:TPS

TUBULAR TYPE SMALL LEAD, SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)


Designed to preload with a single nut. Steel balls whose diameter is slightly larger than clearance between screw shaft and thread groove of nut are put in the nut an pre-loaded. The ratio of load balls to spacer balls used there is 1:1 Suitable for light preload(See Page 16.)


type:TDS

TUBULAR TYPE SMALL LEAD, SINGLE FLANGE
DOUBLE NUT (Spacer preloaded)


Designed to preload with two nuts. A spacer with thickness equivalent to amount of preload is put between these two nuts and preloaded as prescribed. Suitable for medium preload.(See Page 16.)












type:TC

TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Non-preloaded)


Simplest type using a single nut. For use in slight axial clearance.


type:TP

TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)


Designed to preload with a single nut. Steel balls whose diameter is slightly larger than clearance between screw shaft and thread groove of nut are put in the nut and pre-loaded.
The ration of load balls to spacer balls used there is 1:1 Suitable for light load.(See Page 16.)


type:TF

TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Offset lead preloaded)


Designed to preload with a single nut.Lead along the center of nut is enlarged by an amount of preload and preloaded. Suitable for medium preload.(See Page 16.)


type:TD

TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Spacer preloaded)


Designed to preload with two nuts. A spacer with thickness equivalent to amount of preload is put between these two nuts and preloaded as prescribed. Suitable for medium and heavy preload. (See Page 16.)


type:TCL

TUBULAR TYPE HIGH LEAD SINGLE FLANGE SINGLE NUT
(Non-preloaded)


Simplest type using a single nut. For use in slight axial clearance.


type:TPL

TUBULAR TYPE HIGH LEAD SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)


Designed to preload with a single nut. Steel balls whose diameter is slightly larger than clearance between screw shaft and thread groover of nut are put in the nut and pre- loaded.The ratio of load balls to spacer balls used there is 1:1 Suitable for light load (See Page 16.)










TOP