信毅科技有限公司,PVC各式工程塑膠抗靜電板,PC,信毅, Advanced Profile System, Engineering Module Service, Glass Substrate Guide Roller, High Temp, Erosion/Scratch Resistance, Hybrid Bearings, High Temp 信毅科技有限公司









.. 日本電產 NIDEC滾珠導螺桿
type:DC
RETURN GUIDE TYPE SINGLE FLANGE SINGLE NUT
(Non-preloaded)

Simplest type using a single nut. For use in slight axial clearance.

 

 
 
type:DP
RETURN GUIDE TYPE SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)

Designde to preload with a single nut.Steel balls whose
diameter is slightly larger than clearance between screw
shaft and thread groove of nut are put in the nut and pre-loaded.
The ratio of load balls to spacer balls used there is 1:1Suitable for light preload (See Pager 16.)

type:DD
RETURN GUIDE TYPE SINGLE FLANGE DOUBLE
NUT (Spacer preloaded)

Designde to preload with two nuts. A spacer with thickness
equivalent to amount of preload is put between these two
nuts and preloaded as prescribed Suitable for medium
preload.(See Page 16.)
 
 
type:TCS
TUBULAR TYPE SMALL LEAD, SINGLE FLANGE
SINGLE NUT(Non-preloaded)

Simplest type using a single nut.For use in slight axial clearance.
 
 
type:TPS
TUBULAR TYPE SMALL LEAD, SINGLE FLANGE
SINGLE NUT (Over-size ball preloaded)

Designed to preload with a single nut. Steel balls whose
diameter is slightly larger than clearance between screw
shaft and thread groove of nut are put in the nut an pre-loaded.
The ratio of load balls to spacer balls used there is 1:1 Suitable
for light preload(See Page 16.)
 
 
type:TDS
TUBULAR TYPE SMALL LEAD, SINGLE FLANGE
DOUBLE NUT (Spacer preloaded)

Designed to preload with two nuts. A spacer with thickness
equivalent to amount of preload is put between these two
nuts and preloaded as prescribed. Suitable for medium
preload.(See Page 16.)
 

type:TC  
TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Non-preloaded)

Simplest type using a single nut. For use in slight axial
clearance.
 
 
 


 
type:TP
TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Over-size ball preloaded)

Designed to preload with a single nut. Steel balls whose
diameter is slightly larger than clearance between screw
shaft and thread groove of nut are put in the nut and pre-loaded.
The rationof load balls to spacer balls used there is 1:1
Suitable for light load.(See Page 16.)
 
 
type:TF
TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Offset lead preloaded)

Designed to preload with a single nut.Lead along the center
of nut is enlarged by an amount of preload and preloaded.
Suitable for medium preload.(See Page 16.)
 
 
type:TD
TUBULAR TYPE SINGLE FLANGE SINGLE NUT
(Spacer preloaded)

Designed to preload with two nuts. A spacer with thickness
equivalent to amount of preload is put between these two
nuts and preloaded as prescribed. Suitable for medium and
heavy preload. (See Page 16.)
 
 
type:TCL
TUBULAR TYPE HIGH LEAD SINGLE FLANGE
SINGLE NUT (Non-preloaded)

Simplest type using a single nut. For use in slight axial clearance.
 
 
type:TPL
TUBULAR TYPE HIGH LEAD SINGLE FLANGE
SINGLE NUT (Over-size ball preloaded)

Designed to preload with a single nut. Steel balls whose
diameter is slightly larger than clearance between screw
shaft and thread groover of nut are put in the nut and pre-
loaded.The ratio of load balls to spacer balls used there is
1:1 Suitable for light load (See Page 16.)
 

 

 
 
新竹市中華路三段9號10樓之3
10F-3,No.9,Sec.3,Chung-Hwa Rd.,Hsinchu City 30060,Taiwan
TEL:886-3-528-1001 FAX:886-3-525-4513

台中市大里區東興路350號
No.350,Tung-Hsin Rd.,Taizhong City,Da-Li City,Taiwan
TEL:886-4-24064668 FAX:886-4-2406-6146

華南營業處
中華廣東省東莞市清溪鎮羅馬路99號1樓

1F,No. 99, Roma Road, Qingxi Town, Dongguan, Guangdong, China
TEL:+86-769-89771679  FAX:+86-769-87895463